Gears

Redcat Steel Spur Gear (45T)

Steel Spur Gear (45T)(32P/0.8Mod)

Steel Spur Gear (45T)(32P/0.8Mod)

Portal Axle Output Gear (17T 2pcs)

Redcat Scout II Gen8 Portal Axle Output Gear. These are the replacement lower portal box gears us...

Redcat Scout II Gen8 Portal Axle Output Gear. These are the replacement lower portal box gears used in the Redcat portal axle. Package includes two 17 tooth gears.

INCISION AR14B RBX10 RYFT 38/13 GEAR SET

Incision Gear Set for Axial AR14B Axles used in the RBX10 Ryft Feature an included larger bearin...

Incision Gear Set for Axial AR14B Axles used in the RBX10 Ryft Feature an included larger bearing on the inner side of the pinion for greater load handling.  Works with stock axle housings* or Vanquish Products axle housings Hardened Machined gear construction improves durability over stock Compatible with stock differential housing or Vanquish AR14B spools  

INCISION AR14B RBX10 RYFT 43/13 GEAR SET

Incision Gear Set for Axial AR14B Axles used in the RBX10 Ryft 43/13 gear ratio allows for tunin...

Incision Gear Set for Axial AR14B Axles used in the RBX10 Ryft 43/13 gear ratio allows for tuning overall gear ratio or creating underdrive when installed only in rear axle  Feature an included larger bearing on the inner side of the pinion for greater load handling.  Works with stock axle housings* or Vanquish Products axle housings Hardened machined gear construction improves durability over stock Compatible with stock differential housing or Vanquish AR14B spools  

Extra Hard 23 Tooth Blackened Steel 32p Pinion,...

Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slippe...

Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the surface even more. High carbon steel is naturally higher in lubricity and lower in adhesion than milder grades of steel making these gears ideal for use with metal spur gears. All pinions precision machined and stamped with the number of teeth. One 4mm set screw included. 2mm allen wrench (NOT INCLUDED) fits...

Axial Heavy Duty Bevel Gear Set (38/13)

Features: Use Axial Heavy Duty Bevel Gears in different combinations front and rear. Use 36/14...

Features: Use Axial Heavy Duty Bevel Gears in different combinations front and rear. Use 36/14 Front ~ 43/13 Rear -or- 38/13 Front ~ 43/13 - Rear to reduce torque twist in the rear and overdrive the front axle to help pull you through climbs easier. Use the same bevel gear set in the front and rear to raise or lower your gear ratio. The heavy duty gear set offers improved gear mesh reducing slop in the drive train. Spiral cut gears offer increased gear tooth contact and run quieter. The ...

Axial Heavy Duty "Underdrive" Bevel Gear Set (4...

Features: Use Axial Heavy Duty Bevel Gears in different combinations front and rear. Use 36/14...

Features: Use Axial Heavy Duty Bevel Gears in different combinations front and rear. Use 36/14 Front ~ 43/13 Rear -or- 38/13 Front ~ 43/13 - Rear to reduce torque twist in the rear and overdrive the front axle to help pull you through climbs easier. Use the same bevel gear set in the front and rear to raise or lower your gear ratio. The heavy duty gear set offers improved gear mesh reducing slop in the drive train. Spiral cut gears offer increased gear tooth contact and run quieter. Gear...

Axial Gear Set

This is a replacement gear set from Axial. Includes the idler gear, and the output gear for the t...

This is a replacement gear set from Axial. Includes the idler gear, and the output gear for the transmission.

Hot Racing HD Spiral Bevel Underdrive Gear Set ...

Features: Precision machined helical spiral cut gears offer inherently greater strength and smoo...

Features: Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the factory bevel cut gears High carbon steel construction Stronger than the stock bevel-cut zinc cast gears 43T/13T provides 13% gear reduction (vs stock 38T/13T) to increase available torque to ground Requires: Installation following kit manual One M3x2.5x11mm (Axial AXIA0175 or Hot Racing HRASSP311) or M3x2.5x12mm (Axial AXIA176) screw shaft for driveshaft attachment Do not ...

Robinson Racing Extra Hard Steel .8 Mod Pinion ...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm sha...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm shaft and are intended for use with the Traxxas E-Maxx model #3905. These will also work with standard size brushless motors when used with the RRP1200 reducer sleeve, making them an excellent choice for the Traxxas Slash 4x4.

Robinson Racing Gen3 Slipper Kit (Slash 4x4) (54T)

This is an optional Robinson Racing Gen3 Slipper Kit, and is intended for use with the Traxxas Sl...

This is an optional Robinson Racing Gen3 Slipper Kit, and is intended for use with the Traxxas Slash 4x4. Robinson Racing GEN3 Slipper Units are over-engineered to meet the punishing demands of the most powerful brushless motor systems! The new GEN3 Slipper Unit is a captured design to prevent slipper pad blowout and deliver maximum power to the ground. The hi-performance hardened steel spur gear will not fail or strip. Strong and tough 0.8 module/32-pitch teeth handle all the power you can p...

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

Robinson Racing 48P Machined Pinion Gear (5mm B...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pi...

Robinson Racing 5mm Bore, 48 Pitch Machined Pinion Gears can be used on any car that uses a 48 pitch spur, when using a motor that has a 5mm rotor shaft. Robinson Racing pinions are precision machined from high quality steel for durability, and have the number of teeth stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one 4mm set screw.

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw. 

Robinson Racing Absolute 32P Hardened Pinion Ge...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited fo...

Robinson Racing Absolute 32 Pitch Hardened Pinion Gears are built to last, and are best suited for use with Robinson steel spur gears. They feature an 1/8 inch bore, a 32 pitch tooth profile, with the tooth number stamped on the side for easy identification. Choose from multiple options to fine tune the gear ratio of your vehicle. Package includes one gear and one 5-40 set screw.

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

Robinson Racing Extra Hard Steel 32P Pinion Gea...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipp...

Features: Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units 5mm Bore Fits 5mm motor shaft Available in multiple tooth count options, use the pull down menu above to pick the size you need  NOTE: RRP1200 5 m/m to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors. 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly lar...

Robinson Racing Extra Hard Steel .8 Mod Pinion ...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm sha...

Robinson Racing Extra Hard Steel 5mm Bore .8 Mod Pinion Gears fit brushless motors with a 5mm shaft and are intended for use with the Traxxas E-Maxx model #3905. These will also work with standard size brushless motors when used with the RRP1200 reducer sleeve, making them an excellent choice for the Traxxas Slash 4x4.

Robinson Racing Steel 48P Pinion Gear (3.17mm B...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that fea...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that feature a hard nickel coating for durability. The pinions have an 1/8" bore, are stamped with the tooth number for easy identification and include one 5-40 set screw. These gears are available in a variety of tooth count options to fine tune the torque and top speed of your vehicle.

Robinson Racing Steel 48P Pinion Gear (3.17mm B...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that fea...

These Robinson Racing Products 48 Pitch Pinion Gears are precision cut alloy steel gears that feature a hard nickel coating for durability. The pinions have an 1/8" bore, are stamped with the tooth number for easy identification and include one 5-40 set screw. These gears are available in a variety of tooth count options to fine tune the torque and top speed of your vehicle.

Robinson Racing Axial Yeti Output Lightended X-...

Yeti 27t Output Lightened X-Hard Gear W/ Screw Shaft Holes Robinson Racing Products indicates t...

Yeti 27t Output Lightened X-Hard Gear W/ Screw Shaft Holes Robinson Racing Products indicates this will work with:Yeti 1/10th Scale Electric 4WD - RTR - AX90026

Incision 43/13 AR60 Gear Set

The Incision AR60 Steel 43/13 Underdrive Gear Set fits all Axial AR60 based axles, as well as the...

The Incision AR60 Steel 43/13 Underdrive Gear Set fits all Axial AR60 based axles, as well as the SCX10 and AX10 style axle housing (AXI80003). These underdrive ratio gears are an option for the Axial HD Underdrive gear set (AXI30402), and feature helical cut teeth for improved gear mesh to reduce slop in the drive train. Plus, the 43/13 tooth count will deliver reduced wheel speed and will help to reduce torque twist.Features: 38t Ring Gear and 13t Pinion gear matches the gear ratio of the ...

WRAITH Solid one piece Gear/Output

hardened one piece diff locker gear for use on the axial wraith vehicles FEATURES: cnc machined s...

hardened one piece diff locker gear for use on the axial wraith vehicles FEATURES: cnc machined steel gear is then nitride coated for increased wear resistance, improved fatigue life, and enhanced corrosion resistance hardened steel construction 

Leading Edge Machining Bombproof TRX-4 Traxxas ...

Traxxas TRX-4 Spool For those that wanted to replace the selectable locking differential with a ...

Traxxas TRX-4 Spool For those that wanted to replace the selectable locking differential with a full time traction solution.  Less moving parts = Less possible breakage and less weight. These are solid C1144 Stressproof Steel Hardened. Made in the USA And come with a BOMBPROOF LIFETIME warranty.  Works with your gears, hardware, and axle shafts. A direct drop in stock Replacement. 

Robinson Racing One Piece Steel Main Transmissi...

Robinson Racing One Piece Steel MAIN Transmission Gear Wraith This is an optional Robinson Racing...

Robinson Racing One Piece Steel MAIN Transmission Gear Wraith This is an optional Robinson Racing Hardened One Piece Steel Bottom Transmission MAIN Gear, and is intended for use with the Axial Wraith rock crawler. This output is all one piece, and has 5mm outputs. Robinson Racing gears are precision machined and hardened for the ultimate in reliability and performance.